The 3023B is a variant of the 3023 series, miniature triaxial for ESS, HALT/HASS, with higher sensitivity 100 mV/g, providing better performance for general three-axis vibration measurements. Lightweight design for applications requiring high accuracy in limited space.

· Key Specifications:

• Sensitivity: 100 mV/g ±10%.
• Measurement range: ±50 g pk.
• Frequency range: 0.5 to 5,000 Hz.
• Weight: 2 grams.
• Size: Miniature cube.
• Operating temperature: -55°C to +125°C.
• Connector: 4-pin.
• Mounting: Adhesive.
• Shock resistance: 5000 g pk.

The 2200C is a charge mode high temp probe-style pressure sensor for far-field blast, ultra fast rise time, hydraulics/pneumatics, and general pressure monitoring.

· Key Specifications:

• Sensitivity: pC/psi series.
• Pressure range: High.
• Frequency range: Ultra high.
• Operating temperature: +260°C.
• Connector: Charge.
• Type: Probe high temp.
• Rise time: Ultra fast.
• Application: Blast/hydraulics.

The 1053V is a general purpose IEPE force sensor measuring up to 5000 lbf, 1–500 mV/lbf sensitivity, quartz compression, rugged stainless steel, suitable for modal analysis and process control.

· Key Specifications:

• Sensitivity: 1–500 mV/lbf.
• Measurement range: Up to 5000 lbf.
• Frequency range: Wide.
• Operating temperature: -73°C to +121°C.
• Material: Stainless steel.
• Connector: 10-32.
• Mounting: Tapped holes.
• Application: General dynamic.

The 3092C is a single-axis charge mode accelerometer for high temperature, used in automotive engine/exhaust analysis, turbine vibration, and high temperature monitoring, low sensitivity for wide range. Rugged design for hot environments.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 2-5 pC/g.
• Measurement range: ±2000 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +260°C.
• Resonance frequency: 40 kHz.
• Shock resistance: 3000 g pk.

The 1060V is a high range IEPE force sensor up to 50,000 lbf, low sensitivity 0.1–10 mV/lbf, quartz compression, heavy duty stainless steel 460 g, suitable for large force industrial applications.

· Key Specifications:

• Sensitivity: 0.1–10 mV/lbf.
• Measurement range: Up to 50,000 lbf.
• Frequency range: Wide.
• Operating temperature: -51°C to +121°C.
• Weight: 460 g.
• Connector: 10-32 axial.
• Mounting: 3/8-16 tapped.
• Material: Stainless steel.

The 2301B is a charge mode high temp pressure sensor for dynamic pressure in high temperature environments.

· Key Specifications:

• Sensitivity: pC/psi.
• Pressure range: High.
• Frequency range: Wide.
• Operating temperature: High temp.
• Connector: Charge.
• Type: High temp pressure.
• Rise time: Fast.
• Application: High temp dynamics.

The 1203V is an IEPE ring style (force washer) force sensor for dynamic compression force measurement, sensitivity approx. 0.05 to 1 mV/lbf depending on variant, rugged quartz stainless steel design, suitable for force link, machinery studies, and press monitoring with through-bolt preload mounting.

· Key Specifications:

• Sensitivity: 0.05–1 mV/lbf (model dependent).
• Measurement range: 5,000–20,000 lbf compression.
• Frequency range: Wide frequency response.
• Operating temperature: -51°C to +121°C.
• Connector: 10-32 coaxial.
• Type: IEPE ring style.
• Mounting: Through bolt preload.
• Material: Stainless steel.

The 3010M is a primary transfer standard single-axis accelerometer for calibrating other sensors against NIST standards, 10 mV/g sensitivity, back-to-back design for high accuracy calibration. Ideal for laboratory and quality control with wide frequency range.

· Key Specifications:

• Sensitivity: 10 mV/g ±2%.
• Measurement range: ±500 g pk.
• Frequency range: 2 to 5,000 Hz.
• Weight: 20 grams.
• Size: Ø0.75 x 1.5 inch.
• Operating temperature: -55°C to +125°C.
• Connector: 10-32.
• Mounting: Back-to-back.
• Accuracy: Primary transfer standard.