The 40PH-10 is a low-cost CCP free-field array microphone, precisely phase-matched, with wide frequency range up to 20 kHz, dynamic range up to approx. 135 dB peak, suitable for multi-channel measurements, noise source location, and beamforming with low cost for multiple units.

· Key Specifications:

• Sensitivity: Approximately 10 mV/Pa.
• Dynamic range: Approximately 30 dB(A) to 135 dB peak.
• Frequency range: Up to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V (prepolarized).
• TEDS: Yes.
• Application: Array, phase-matched.

The 50GI is a CCP intensity probe with phase-matched pair, direct analyzer connection, including 12-100 mm spacers for wide frequency range 50 Hz to 10 kHz.

· Key Specifications:

• Sensitivity: 12.5 mV/Pa.
• Dynamic range: 27 dB(A) to 146 dB.
• Frequency range: 50 Hz to 10 kHz.
• Connector: CCP.
• Phase matched: Yes.
• Spacers: 12-100 mm.
• TEDS: Yes.
• Application: Sound power.

The 46DD-FV is a 1/8" CCP pressure front vented microphone set using 40DD cartridge, suitable for pressure measurements in confined spaces with front venting to minimize static pressure effects, ideal for special coupler applications.

· Key Specifications:

• Sensitivity: Approximately 1 mV/Pa.
• Dynamic range: Approximately 45 dB(A) to 170 dB.
• Frequency range: 10 Hz to 140 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Venting: Front.
• TEDS: Yes.
• Polarization: 0 V.

The 147AX is a rugged CCP pressure microphone set specialized for hot/cold engine noise measurement in automotive NVH, with three-layer diaphragm protection and new form factor for quick mounting, high harsh environment tolerance.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: Wide for engine noise.
• Frequency range: Suitable for automotive NVH.
• Operating temperature: High (hot engine).
• Connector: BNC.
• Type: Rugged pressure.
• TEDS: Yes.
• Application: Engine noise testing.

The 47BX is a low profile 1/4" CCP flush-mount microphone set, wide dynamic range from 44 dB to 165 dB, suitable for precise surface measurements with high frequencies.

· Key Specifications:

• Sensitivity: Standard.
• Dynamic range: 44 dB to 165 dB.
• Frequency range: 4 Hz to 70 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot to BNC.
• Mounting: Flush-mount.
• TEDS: Yes.
• Size: 1/4".

The 46AM is a 1/2" CCP free-field microphone set with wide frequency range, 50 mV/Pa sensitivity, suitable for high-frequency sound measurement with extended dynamic range.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 15 dB(A) to 148 dB.
• Frequency range: 2.6 Hz to 70 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Type: Free-field wide frequency.
• TEDS: Yes.
• Standard: IEC 61094.

The 40PL-11 is a short version of high pressure CCP free-field array microphone, phase-matched, compact design for limited spaces, handling 150 dB peak levels, suitable for array measurements in confined environments.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Length: Short.

The 40HH is a 1/2" low-noise system measuring very low sound below hearing threshold, suitable for hard-disk or quiet room measurements with extremely low noise floor.

· Key Specifications:

• Sensitivity: High.
• Dynamic range: Very low noise floor.
• Frequency range: Wide.
• Noise floor: Below human hearing.
• Connector: Complete system.
• Polarization: Externally polarized.
• Size: 1/2".
• Application: Hard-disk, quiet rooms.