The 40PH-10 is a low-cost CCP free-field array microphone, precisely phase-matched, with wide frequency range up to 20 kHz, dynamic range up to approx. 135 dB peak, suitable for multi-channel measurements, noise source location, and beamforming with low cost for multiple units.

· Key Specifications:

• Sensitivity: Approximately 10 mV/Pa.
• Dynamic range: Approximately 30 dB(A) to 135 dB peak.
• Frequency range: Up to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V (prepolarized).
• TEDS: Yes.
• Application: Array, phase-matched.

The 46BC is a 1/4" CCP multifield high sensitivity microphone set with 20 mV/Pa, lowest noise floor 24 dB(A), suitable for multi-directional measurement in vehicle cabins or complex environments.

· Key Specifications:

• Sensitivity: 20 mV/Pa.
• Dynamic range: 24 dB(A) to 146 dB.
• Frequency range: 4 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Type: Multifield high sensitivity.
• TEDS: Yes.
• Noise floor: 24 dB(A).

The 40PL-10 is a high pressure CCP free-field array microphone, phase-matched, handling high levels up to 150 dB peak, wide frequency range to 20 kHz, ideal for strong noise source measurements in arrays with high accuracy and reasonable cost.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Peak SPL: 150 dB.

The 147EB is an extremely rugged CCP free-field microphone set for on-road brake noise measurement, withstanding strong impacts and harsh weather, tested over 10,000 real-road miles.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: Wide for brake noise.
• Frequency range: Suitable for automotive.
• Operating temperature: Extreme conditions.
• Connector: BNC.
• Type: X-rugged free-field.
• TEDS: Yes.
• Application: Brake noise testing.

The 46AG is a 1/2" LEMO pressure microphone set with 200V polarization, suitable for high sound pressure measurements in couplers or boundaries.

· Key Specifications:

• Sensitivity: 12.5 mV/Pa.
• Dynamic range: 20 dB(A) to 160 dB.
• Frequency range: 3 Hz to 10 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: 7-pin LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Type: Pressure.

The 40PL-11 is a short version of high pressure CCP free-field array microphone, phase-matched, compact design for limited spaces, handling 150 dB peak levels, suitable for array measurements in confined environments.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Length: Short.

The 46AZ is a 1/2" CCP free-field low-frequency microphone set, high sensitivity for measuring infrasound like wind turbine or low vibration.

· Key Specifications:

• Sensitivity: High (low frequency optimized).
• Dynamic range: Wide low noise.
• Frequency range: Low frequency (down to low Hz).
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Type: Free-field low frequency.
• TEDS: Yes.
• Application: Wind turbine, infrasound.

The 47BX is a low profile 1/4" CCP flush-mount microphone set, wide dynamic range from 44 dB to 165 dB, suitable for precise surface measurements with high frequencies.

· Key Specifications:

• Sensitivity: Standard.
• Dynamic range: 44 dB to 165 dB.
• Frequency range: 4 Hz to 70 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot to BNC.
• Mounting: Flush-mount.
• TEDS: Yes.
• Size: 1/4".