The 40PL-10 is a high pressure CCP free-field array microphone, phase-matched, handling high levels up to 150 dB peak, wide frequency range to 20 kHz, ideal for strong noise source measurements in arrays with high accuracy and reasonable cost.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Peak SPL: 150 dB.

The 46DD is the smallest 1/8" CCP pressure microphone set using 40DD prepolarized cartridge, suitable for sound pressure measurements in very tight spaces, couplers or high-frequency environments, with high reliability and TEDS support.

· Key Specifications:

• Sensitivity: Approximately 1 mV/Pa.
• Dynamic range: Approximately 45 dB(A) to 170 dB.
• Frequency range: 10 Hz to 140 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Polarization: 0 V (prepolarized).
• TEDS: Yes.
• Standard: IEC 61094.

The 46BG-FV is a 1/4" CCP pressure front vented high pressure microphone set, low sensitivity for high levels with front venting.

· Key Specifications:

• Sensitivity: Low.
• Dynamic range: High peak.
• Frequency range: High.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Type: Pressure front vented high pressure.
• TEDS: Yes.
• Venting: Front.

The 47BX is a low profile 1/4" CCP flush-mount microphone set, wide dynamic range from 44 dB to 165 dB, suitable for precise surface measurements with high frequencies.

· Key Specifications:

• Sensitivity: Standard.
• Dynamic range: 44 dB to 165 dB.
• Frequency range: 4 Hz to 70 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot to BNC.
• Mounting: Flush-mount.
• TEDS: Yes.
• Size: 1/4".

The 46AM is a 1/2" CCP free-field microphone set with wide frequency range, 50 mV/Pa sensitivity, suitable for high-frequency sound measurement with extended dynamic range.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 15 dB(A) to 148 dB.
• Frequency range: 2.6 Hz to 70 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Type: Free-field wide frequency.
• TEDS: Yes.
• Standard: IEC 61094.

The 46AG is a 1/2" LEMO pressure microphone set with 200V polarization, suitable for high sound pressure measurements in couplers or boundaries.

· Key Specifications:

• Sensitivity: 12.5 mV/Pa.
• Dynamic range: 20 dB(A) to 160 dB.
• Frequency range: 3 Hz to 10 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: 7-pin LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Type: Pressure.

The 46BC is a 1/4" CCP multifield high sensitivity microphone set with 20 mV/Pa, lowest noise floor 24 dB(A), suitable for multi-directional measurement in vehicle cabins or complex environments.

· Key Specifications:

• Sensitivity: 20 mV/Pa.
• Dynamic range: 24 dB(A) to 146 dB.
• Frequency range: 4 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Type: Multifield high sensitivity.
• TEDS: Yes.
• Noise floor: 24 dB(A).

The 147EB is an extremely rugged CCP free-field microphone set for on-road brake noise measurement, withstanding strong impacts and harsh weather, tested over 10,000 real-road miles.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: Wide for brake noise.
• Frequency range: Suitable for automotive.
• Operating temperature: Extreme conditions.
• Connector: BNC.
• Type: X-rugged free-field.
• TEDS: Yes.
• Application: Brake noise testing.