The 3092C is a single-axis charge mode accelerometer for high temperature, used in automotive engine/exhaust analysis, turbine vibration, and high temperature monitoring, low sensitivity for wide range. Rugged design for hot environments.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 2-5 pC/g.
• Measurement range: ±2000 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +260°C.
• Resonance frequency: 40 kHz.
• Shock resistance: 3000 g pk.

The 3056C is a high-temperature charge mode single-axis accelerometer +375°F (+190°C), 15 pC/g sensitivity, rugged design for general purpose vibration in hot environments. Provides wide bandwidth and high stability.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 15 pC/g.
• Measurement range: ±500 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +190°C.
• Resonance frequency: 30 kHz.
• Shock resistance: 5000 g pk.

The 3023A is a miniature triaxial accelerometer for Environmental Stress Screening (ESS), HALT/HASS, and general triaxial vibration measurements, 10 mV/g sensitivity, high shock resistance. Provides accurate three-axis data for product testing with low mass loading.

· Key Specifications:

• Sensitivity: 10 mV/g ±10%.
• Measurement range: ±500 g pk.
• Frequency range: 1.5 to 10,000 Hz (±15%).
• Weight: 1.5 grams.
• Size: 0.28 inch cube.
• Operating temperature: -55°C to +125°C.
• Connector: 1/4-28 4-pin.
• Mounting: Adhesive.
• Shock resistance: 5000 g pk.

The 3220C is a low profile charge mode single-axis accelerometer for high temperature, used in ESS, vibration control, and high temperature monitoring, rugged titanium construction.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 10 pC/g.
• Measurement range: ±500 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +190°C.
• Resonance frequency: 35 kHz.
• Shock resistance: 5000 g pk.

The 1050V is an IEPE force sensor for modal and structural analysis, high sensitivity, quartz compression mode design, suitable for dynamic force in structural testing with high accuracy and low mass.

· Key Specifications:

• Sensitivity: High (series variants).
• Measurement range: Up to thousands lbf.
• Frequency range: Wide for modal.
• Operating temperature: -73°C to +121°C.
• Material: Stainless steel.
• Connector: 10-32.
• Mounting: Tapped holes.
• Application: Modal/structural.

The 2310A is a charge mode rugged pressure sensor for high intensity and high temp applications.

· Key Specifications:

• Sensitivity: pC/psi.
• Pressure range: High SPL.
• Frequency range: High.
• Operating temperature: High.
• Connector: Charge.
• Type: Rugged pressure.
• Acceleration comp: Yes.
• Application: Industrial high intensity.

The 3055C is a single-axis charge mode accelerometer with high temperature +375°F (+190°C), 15 pC/g sensitivity, titanium hermetic sealed housing, used for general vibration monitoring in high temperature. Lightweight, base isolated to reduce EMI.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 15 pC/g.
• Measurement range: ±500 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +190°C.
• Resonance frequency: 30 kHz.
• Shock resistance: 5000 g pk.

The 1203V is an IEPE ring style (force washer) force sensor for dynamic compression force measurement, sensitivity approx. 0.05 to 1 mV/lbf depending on variant, rugged quartz stainless steel design, suitable for force link, machinery studies, and press monitoring with through-bolt preload mounting.

· Key Specifications:

• Sensitivity: 0.05–1 mV/lbf (model dependent).
• Measurement range: 5,000–20,000 lbf compression.
• Frequency range: Wide frequency response.
• Operating temperature: -51°C to +121°C.
• Connector: 10-32 coaxial.
• Type: IEPE ring style.
• Mounting: Through bolt preload.
• Material: Stainless steel.