The 2301C is a charge mode high temp series pressure sensor for transient pressure in extreme thermal environments.

· Key Specifications:

• Sensitivity: pC/psi.
• Pressure range: High.
• Frequency range: High.
• Operating temperature: High temp.
• Connector: Charge.
• Type: High temp charge.
• Rugged: Yes.
• Application: Transient high temp.

The 3092C is a single-axis charge mode accelerometer for high temperature, used in automotive engine/exhaust analysis, turbine vibration, and high temperature monitoring, low sensitivity for wide range. Rugged design for hot environments.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 2-5 pC/g.
• Measurement range: ±2000 g pk.
• Frequency range: 1 to 10,000 Hz.
• Operating temperature: -55°C to +260°C.
• Resonance frequency: 40 kHz.
• Shock resistance: 3000 g pk.

The 1061V is an IEPE force sensor for press monitoring, 500–50,000 lbf range, 0.1-10 mV/lbf sensitivity, quartz, 452 g stainless steel, suitable for process control and heavy force measurements.

· Key Specifications:

• Sensitivity: 0.1-10 mV/lbf.
• Measurement range: 500–50,000 lbf.
• Frequency range: Wide.
• Operating temperature: -51°C to +121°C.
• Weight: 452 g.
• Connector: 10-32 radial.
• Mounting: 3/8-16 tapped.
• Application: Press monitoring.

The 2301B is a charge mode high temp pressure sensor for dynamic pressure in high temperature environments.

· Key Specifications:

• Sensitivity: pC/psi.
• Pressure range: High.
• Frequency range: Wide.
• Operating temperature: High temp.
• Connector: Charge.
• Type: High temp pressure.
• Rise time: Fast.
• Application: High temp dynamics.

The 3006A is a moisture-resistant single-axis accelerometer with high sensitivity 500 mV/g, designed for vibration measurement in humid or short-term immersion environments like structural monitoring or stress testing. Protected housing, high accuracy for long-term use in moist conditions. Suitable for food industry, marine, or high-humidity applications.

· Key Specifications:

• Sensitivity: 500 mV/g ±10%.
• Measurement range: ±10 g pk.
• Frequency range: 0.5 to 500 Hz.
• Weight: 12 grams.
• Size: Ø0.75 x 1.2 inch.
• Operating temperature: -55°C to +125°C.
• Connector: 10-32 coaxial.
• Mounting: Stud.
• Moisture resistance: Special, IP67 option.

The 3030C1 is a high-temperature charge mode single-axis accelerometer (+500°F/+260°C), low sensitivity 0.4 pC/g, rugged hermetic sealed design for Environmental Stress Screening (ESS), HALT/HASS, and vibration in extreme temperature environments. Industry workhorse for test laboratories from cryogenic to high-heat.

· Key Specifications:

• Type/technology: Piezoelectric charge.
• Direction/Axes: Uniaxial.
• Sensitivity: 0.4 pC/g.
• Measurement range: ±5000 g pk.
• Frequency range: 5 to 10,000 Hz.
• Operating temperature: -100°C to +260°C.
• Resonance frequency: 45 kHz.
• Shock resistance: 3000 g pk.

The 3003B is a high performance triaxial accelerometer designed for down-hole drill head vibration monitoring, low sensitivity 2 mV/g to handle wide measurement range. Titanium housing, high shock resistance, low voltage operation, suitable for oil & gas and harsh environments. Ideal for applications requiring reliable data with minimal mass loading.

· Key Specifications:

• Sensitivity: 2 mV/g ±10%.
• Measurement range: ±2500 g pk.
• Frequency range: 1 to 10,000 Hz.
• Weight: 6 grams.
• Size: 0.4 x 0.4 x 0.4 inch.
• Operating temperature: -55°C to +125°C.
• Connector: 1/4-28 4-pin.
• Mounting: Adhesive.
• Shock resistance: 5000 g pk.

The 1051V is a general purpose dynamic IEPE force sensor measuring 10 to 5000 lbf, 1-500 mV/lbf sensitivity, quartz sensing, 28 g stainless steel housing, suitable for process control and general force measurements.

· Key Specifications:

• Sensitivity: 1–500 mV/lbf.
• Measurement range: 10–5000 lbf (tension/compression).
• Frequency range: Wide frequency.
• Operating temperature: -73°C to +121°C.
• Weight: 28 g.
• Connector: 10-32 radial.
• Mounting: 1/4-28 tapped.
• Material: Stainless steel.