The 40PL-10 is a high pressure CCP free-field array microphone, phase-matched, handling high levels up to 150 dB peak, wide frequency range to 20 kHz, ideal for strong noise source measurements in arrays with high accuracy and reasonable cost.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Peak SPL: 150 dB.

The 40PH-10 is a low-cost CCP free-field array microphone, precisely phase-matched, with wide frequency range up to 20 kHz, dynamic range up to approx. 135 dB peak, suitable for multi-channel measurements, noise source location, and beamforming with low cost for multiple units.

· Key Specifications:

• Sensitivity: Approximately 10 mV/Pa.
• Dynamic range: Approximately 30 dB(A) to 135 dB peak.
• Frequency range: Up to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V (prepolarized).
• TEDS: Yes.
• Application: Array, phase-matched.

The 46AN is a 1/2" LEMO free-field low-frequency microphone set with 200V polarization, suitable for infrasound and low-frequency measurements like wind turbine with high sensitivity.

· Key Specifications:

• Sensitivity: High for low frequency.
• Dynamic range: Wide low noise.
• Frequency range: Low frequency optimized.
• Operating temperature: -30°C to +85°C.
• Connector: 7-pin LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Type: Free-field low frequency.

The 46BL-1-FV is a 1/4" CCP pressure high sensitivity front vented microphone set, 20 mV/Pa sensitivity, suitable for sensitive measurements with front venting.

· Key Specifications:

• Sensitivity: 20 mV/Pa.
• Dynamic range: 24 dB(A) to 146 dB.
• Frequency range: 4 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Type: Pressure high sensitivity front vented.
• TEDS: Yes.
• Venting: Front.

The 50GI-R is a CCP intensity probe with remote control for distant measurements, phase-matched, convenient for hard-to-reach applications.

· Key Specifications:

• Sensitivity: 12.5 mV/Pa.
• Dynamic range: Wide.
• Frequency range: IEC Class 1.
• Connector: CCP.
• Remote control: Yes.
• Phase matched: Yes.
• Spacers: Multiple.
• Application: Remote intensity.

The 40HH is a 1/2" low-noise system measuring very low sound below hearing threshold, suitable for hard-disk or quiet room measurements with extremely low noise floor.

· Key Specifications:

• Sensitivity: High.
• Dynamic range: Very low noise floor.
• Frequency range: Wide.
• Noise floor: Below human hearing.
• Connector: Complete system.
• Polarization: Externally polarized.
• Size: 1/2".
• Application: Hard-disk, quiet rooms.

The 46AD is a 1/2" CCP pressure microphone set with high sensitivity 50 mV/Pa, suitable for sensitive sound pressure measurements in couplers or boundaries with low noise floor.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 17 dB(A) to 146 dB.
• Frequency range: 3.15 Hz to 20 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Type: Pressure high sensitivity.
• TEDS: Yes.
• Standard: IEC 61094 WS2P.

The 46DP-1 is a 1/8" LEMO pressure microphone set for tight spaces with 200V polarization, suitable for special applications requiring externally polarized technology.

· Key Specifications:

• Sensitivity: Approximately 1 mV/Pa.
• Dynamic range: Wide high frequency.
• Frequency range: High frequency.
• Operating temperature: -30°C to +100°C.
• Connector: LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Size: 1/8".