The 46DD-FV is a 1/8" CCP pressure front vented microphone set using 40DD cartridge, suitable for pressure measurements in confined spaces with front venting to minimize static pressure effects, ideal for special coupler applications.

· Key Specifications:

• Sensitivity: Approximately 1 mV/Pa.
• Dynamic range: Approximately 45 dB(A) to 170 dB.
• Frequency range: 10 Hz to 140 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: Microdot.
• Venting: Front.
• TEDS: Yes.
• Polarization: 0 V.

The 40PL-10 is a high pressure CCP free-field array microphone, phase-matched, handling high levels up to 150 dB peak, wide frequency range to 20 kHz, ideal for strong noise source measurements in arrays with high accuracy and reasonable cost.

· Key Specifications:

• Sensitivity: 10 mV/Pa.
• Dynamic range: 32 dB(A) to 150 dB peak.
• Frequency range: 50 Hz to 20 kHz.
• Operating temperature: -30°C to +100°C.
• Connector: SMB.
• Polarization: 0 V.
• TEDS: Yes.
• Peak SPL: 150 dB.

The 46AF is a standard 1/2" LEMO free-field microphone set with 200V polarization, equivalent to CCP 46AE, suitable for medium sound level measurements with high accuracy for general diagnostics.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 17 dB(A) to 138 dB.
• Frequency range: 3.15 Hz to 20 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: 7-pin LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Type: Free-field standard.

The 46AE is a standard 1/2" CCP free-field microphone set with 50 mV/Pa sensitivity, suitable for measuring medium sound pressure levels at medium frequencies, with TEDS and BNC connector. Standard design for general acoustic diagnostics, wide dynamic range.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 17 dB(A) to 138 dB.
• Frequency range: 3.15 Hz to 20 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Polarization: 0 V (prepolarized).
• TEDS: Yes.
• Standard: IEC 61094 WS2F.

The 46AM is a 1/2" CCP free-field microphone set with wide frequency range, 50 mV/Pa sensitivity, suitable for high-frequency sound measurement with extended dynamic range.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: 15 dB(A) to 148 dB.
• Frequency range: 2.6 Hz to 70 kHz.
• Operating temperature: -30°C to +85°C.
• Connector: BNC.
• Type: Free-field wide frequency.
• TEDS: Yes.
• Standard: IEC 61094.

The 147EB is an extremely rugged CCP free-field microphone set for on-road brake noise measurement, withstanding strong impacts and harsh weather, tested over 10,000 real-road miles.

· Key Specifications:

• Sensitivity: 50 mV/Pa.
• Dynamic range: Wide for brake noise.
• Frequency range: Suitable for automotive.
• Operating temperature: Extreme conditions.
• Connector: BNC.
• Type: X-rugged free-field.
• TEDS: Yes.
• Application: Brake noise testing.

The 46BH-1 is a 1/4" LEMO pressure high pressure microphone set with 200V polarization, low sensitivity for very high sound levels.

· Key Specifications:

• Sensitivity: Low for high pressure.
• Dynamic range: High peak SPL.
• Frequency range: High frequency.
• Operating temperature: -30°C to +100°C.
• Connector: LEMO.
• Polarization: 200 V.
• TEDS: Yes.
• Type: Pressure high pressure.

The 40HH is a 1/2" low-noise system measuring very low sound below hearing threshold, suitable for hard-disk or quiet room measurements with extremely low noise floor.

· Key Specifications:

• Sensitivity: High.
• Dynamic range: Very low noise floor.
• Frequency range: Wide.
• Noise floor: Below human hearing.
• Connector: Complete system.
• Polarization: Externally polarized.
• Size: 1/2".
• Application: Hard-disk, quiet rooms.